Problem in editor

mark-s · PRO Admin Joined: 25 Nov 2007 Posts: 527 Location: nice

i have a problem, new pc, windows 7, everything installed updated, done the lot.
problem is when i go into track editor, when i click on a piece of track, i cannot scroll the piece up or down with the mouse, the buttons still work in editor to spin the piece around.
page up and down will move the piece.
if anybody has had a simular problem, can they please tell me how to go around it.
sensible answers only please.

Moldo · Posted: Mon Apr 26, 2010 7:11 pm Post subject:

I got windows 7 recently as well, don't have that problem Confused

_________________

sosteve · Posted: Mon Apr 26, 2010 7:40 pm Post subject:

sorry mark i got 7 no prob either Crying or Very sad

you could try going control panel>hardware and sound>devices and printers>mouse try uninstalling reinstalling driver but check that wheel is set to 1 notch for 3 lines first
_________________

master of the slow lap and purveyor of really bad jokes.

msquires · Spam King Joined: 12 Apr 2008 Posts: 803

I have the same problem!! Evil or Very Mad

mark-s · PRO Admin Joined: 25 Nov 2007 Posts: 527 Location: nice

just done what steve said, uninstall, then reboot, now working Wink

windows 7 was steve's idea Shocked

msquires · Spam King Joined: 12 Apr 2008 Posts: 803

Just uninstall and then restart PC?

mark-s · PRO Admin Joined: 25 Nov 2007 Posts: 527 Location: nice

sosteve · Posted: Mon Apr 26, 2010 9:33 pm Post subject:

yup will auto reinstall driver Very Happy

_________________

master of the slow lap and purveyor of really bad jokes.

DaCheese · Posted: Mon Apr 26, 2010 10:24 pm Post subject:

This 7 thing is highly infectious. I installed 7 and basically everything I need on Sunday, but was getting boot issues. Tonight I've reinstalled it, doing it properly with the 100MB system reserved partition, and now I'm frantically trying to get my system ready for tomorrow night. Half the stuff I want on here will have to wait until later in the week.
_________________

mark-s · PRO Admin Joined: 25 Nov 2007 Posts: 527 Location: nice

worked briefly last night, turned pc on today same not working Crying or Very sad

tried uninstalling again still no go.

mad · Posted: Tue Apr 27, 2010 6:00 pm Post subject:

it sounds as if windows is updating the driver.....

try searching for the specific manufacturers driver and use that.

What is the mouse make/model and motherboard make/model?

You could also uninstall and then run ccleaner to clean the registry. This should remove all settings / entries that sometimes linger and don't get overwritten when you reinstall.

cheers.

mark-s · PRO Admin Joined: 25 Nov 2007 Posts: 527 Location: nice

What i have found is the scroller does work but if i am slowy scrolling it takes about five full turns to get the piece to move up one turn.
Then if i jab at it quicky it will go up in less turns.
i have downloaded the microsoft driver as well for it, and ccleanered it and clean up it.
Must be something to do with the speed of the scroller Rolling Eyes

sosteve · Posted: Wed Apr 28, 2010 5:51 pm Post subject:

try changing it in the mouse properties
_________________

master of the slow lap and purveyor of really bad jokes.

xaniel · Joined: 31 Dec 2023 Posts: 1741